Today's mcad Article

News about mcad

multiple LLQ Low Latency Queues / bandwith (remaining) percent

Sun, 09 Nov 2008 09:26:06 +0000
LLQ means priority a queue, to forward voice and video traffic before all other traffic.
If you have multiple LLQ queues, the difference between the single and multiple queue configuration is, that if you have at least two priority queues, both get policed. So if configured in a single police-map command, you will always policed the ...]

CME - using transcoding resources on a separate chassis

Wed, 26 Jul 2006 04:17:14 +0000
You can use transcoding resources available on a separate chassis with CME. You can go upto 5 sdspfarm sessions. CME will share all available resources.
CME configs:
ip source-address 10.1.11.4 port 2000 ———– 10.1.11.4 is the CME router.
sdspfarm units 2
sdspfarm transcode sessions 2
sdspfarm tag 1 mtp0013c3443150 —- this transcoder is on the same box as CME. Lets ...]

Sorry for the 404’s

Mon, 05 Jan 2009 12:53:49 +0000
I already had a few readers and commenters here, but alas I have to kill this blog before it really got going.  Rules of the company that bought out the company I work for…sorry. 
Posted in Administrivia      

How to speed up CTI port addition process on IPCCX?

Tue, 25 Jul 2006 00:43:11 +0000
When you add CTI ports via IPCCX admin, it uses AXL to add into CCM database.
The service parameter “Maximum AXL Writes Allowed per Minute” determines how soon it can add to the database. By default it is 20. Give a higher value to speed up this process.


Configuring PPP multilink and fragmentation over Frame-relay

Sat, 19 Aug 2006 02:59:55 +0000
* Remove ip address of serial subinterface interface
* Remove DLCI of subinterface.
* Its recommended to do this configuration on the remote site first.
int s0/0.9
no ip address
frame-relay interface-dlci 900 ppp virtual-template 1
int virtual-template 1
ip add 10.1.1.1 255.255.255.0
ppp multilink
ppp multilink interleave
ppp multilink fragment-delay 10 — milliseconds.
service-policy output VATS


Nice Blog(s)

Mon, 27 Oct 2008 09:10:50 +0000
I came across this blog over the weekend. Im sure Ive seen it before, but spent a bit of time checking it out in more detail recently. There are some really good articles on it for the aspiring CCIE and network engineers out there. Good job Jeremy - its refreshing to see a personal blog ...]

Featured mcad Items



CompUSA's Liquidation Sale!


ccie 350 001
cisco courses | cisco cse | cisco cvoice